Jump to content

Share your Sensorpanels


Mice007

Recommended Posts

Is there a "Share your .rslcd panel" thread, or almost nobody uses that option?

Will .sensorpanel ever allow animated gif files? ..or has that been enabled already? That's the primary reason I used to always use .rslcd panel instead.

Maybe there is a way to use the custom gauge in sensor panel to simulate animation, but instead of being tied to a sensor, just run it on a timer - at least that would allow a sort of 16-frame animation, albeit a relatively slow and jerky one since the entire panel has to be rendered each time, but at least it's something.  

 

  • Like 1
Link to comment
Share on other sites

On 8/18/2021 at 7:11 PM, YoohooX said:

85aLnqe.png

Do you have these in a 900x1440 or smaller? If not, is there a way to make it scale down the sensor file without having to manually adjusting every little thing?

I never made any lower res versions. Unfortunately there is no easy way that I'm aware of to scale it down without having to manually adjust everything.

Link to comment
Share on other sites

3 hours ago, towifo5133 said:

All sensor panels shared on this thread are now archived! Please read the original post for more information. I am not claiming the names on the files as panels created by these people, just who posted them, if you feel like your work is being misused or you don't want it shared, please let me know and I'll make another file!

Contains approximately 500 Sensor panels! Most with the required fonts included in zip files, etc

Mega Link: https://mega.nz/file/w9kCUTKa

Decryption key: OtQpHJQ-KDI56yNk7V-kdVWs685PerOWKOIFpqjuC7c

Thank you everyone for all the edits and your hard work, I saw so many awesome design while browsing the forums, everyone is just super talented. Enjoy! :D

+REP!

  • Like 6
Link to comment
Share on other sites

  • Sensor Moderators
20 hours ago, r3zi3lr said:

Hi,

Thanks for this - looks awesome.

Any ideas on how to get the network part working mine shows no network connectivity.  :(

 

 

Change the network parameters in the Sensor Panel Manageer from or to NCI1 and NCI2.

Link to comment
Share on other sites

On 5/16/2021 at 11:26 AM, ThatManOnTheMoon said:

Material Design Big Bars Simplified 1200x1920

These are simpler and lighter colorways of my last post.

See my previous post for dark colorways (dark-grey and black backgrounds).

Enjoy

Note 1: Nvidia 30XX sensor data (usage, TDP, VRAM temps, etc.) are supported in the new beta release. So adjust accordingly if you're using it. In the sensor panel VRAM temps are set to some random temps at the moment. The % value is set to TDP% as GPU usage% wasn't supported in the current standard release. After installing the beta, I swapped the 2nd GPU fan for TDP watts.

Note 2: The min and max values are just labels, so adjust accordingly or remove per preference.

Ma94BDm.jpg

 

85aLnqe.png

 

oe2we1H.png

 

Additional Pictures:

 

Previous Releases:

 

Material Design Big Bars Simplified 1200x1920.zip 679.31 kB · 489 downloads

One of the most underrated posts around here... Congrats for the job mate!

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

21 hours ago, towifo5133 said:

All sensor panels shared on this thread are now archived! Please read the original post for more information. I am not claiming the names on the files as panels created by these people, just who posted them, if you feel like your work is being misused or you don't want it shared, please let me know and I'll make another file!

Contains approximately 500 Sensor panels! Most with the required fonts included in zip files, etc

Mega Link: https://mega.nz/file/w9kCUTKa

Decryption key: OtQpHJQ-KDI56yNk7V-kdVWs685PerOWKOIFpqjuC7c

Thank you everyone for all the edits and your hard work, I saw so many awesome design while browsing the forums, everyone is just super talented. Enjoy! :D

 

EDIT1: New WIP, organizing the HBars, VBars and Gauges to quickly find one with the size you're looking for, starting to look like something useful! :)

image.thumb.png.9bd478bc3f039f7ad5dabf4447783cb8.png

The hero we didn't know we needed until he appeared!!! 

  • Like 5
Link to comment
Share on other sites

On 8/22/2021 at 1:42 PM, fmiranda said:

Where did you get this screen? thank you

It's a 10.1 2K IPS panel I grabbed off Amazon. It hasn't been restocked by the seller for months. Pretty sure one can probably find a similar one on amazon/aliexpress under a different brand or seller.

 

https://www.amazon.com/EleDuino-Portable-Monitor-Resolution-Raspberry/dp/B07D5V4ZHZ/ref=sr_1_67?dchild=1&keywords=10+inch+monitor+ips&qid=1613063018&sr=8-67

 

jFZU7nr.jpg

 

  • Like 1
Link to comment
Share on other sites

I have a Lamptron HM101 which is a 10.1" IPS monitor - the one I have was sent to me direct from Lamptron (thanks!) and has an impressive 2560x1600 (16:10) native res, although apparently the HM101 is usually 1920x1080 (specs).

I also have the Lamptron HM070 which is a 7" 1024x600 res.

Lamptron made these with AIDA64 in mind. These are the same people who made very good fan controllers for years (and still do). They have a heap of other size monitors now too, including some touch screen models. Check them out. I've seen them on US sites like FrozenCPU and TitanRig, sometimes Amazon and EBay.. ymmv.

My only problem now is that I have a new EVGA Z590 Dark motherboard, but it's so new that AIDA64 does not read any of the fan headers or the DIMM voltage. Waiting for an update.

Link to comment
Share on other sites

7 hours ago, Nereus said:

I have a Lamptron HM101 which is a 10.1" IPS monitor - the one I have was sent to me direct from Lamptron (thanks!) and has an impressive 2560x1600 (16:10) native res, although apparently the HM101 is usually 1920x1080 (specs).

I also have the Lamptron HM070 which is a 7" 1024x600 res.

Lamptron made these with AIDA64 in mind. These are the same people who made very good fan controllers for years (and still do). They have a heap of other size monitors now too, including some touch screen models. Check them out. I've seen them on US sites like FrozenCPU and TitanRig, sometimes Amazon and EBay.. ymmv.

My only problem now is that I have a new EVGA Z590 Dark motherboard, but it's so new that AIDA64 does not read any of the fan headers or the DIMM voltage. Waiting for an update.

 

hey ! Same name :)

Link to comment
Share on other sites

Had this thought for a panel of using the motherboard as the center piece, the heart of the PC, but I feel like it's not coming out as I'd imagine so I'm still testing new ideas and what not, any suggestions would be awesome to improve this one! Thank you!

image.thumb.png.c2b9e615d8c441d833972344c0dc22c9.png

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...