rinaldop Posted February 14 Share Posted February 14 On 2/12/2024 at 7:23 PM, remii24 said: Hi I'm having issues when importing this template. Everything seems off, like the spacing? Is there a fix to this? Read this https://forums.aida64.com/topic/13296-inspired-by-exhumed-sharing-derivatives/page/467/#comment-56524 Quote Link to comment Share on other sites More sharing options...
nikpoth Posted February 14 Share Posted February 14 On 2/11/2024 at 9:06 PM, SCUBA-FAN said: There are so many terrific panel designs here! I was inspired by Exhumed and some of the really clean stuff with entirely native AIDA64 gauges. This makes it very simple for most people to adopt and use. Sharing screenshots of my derivatives. Are you planning on sharing the panel? Quote Link to comment Share on other sites More sharing options...
TheNext Posted February 14 Share Posted February 14 15 hours ago, Splash42 said: I'm not sure how much resources it would use for every second , but if the PNG's are as simple as possible then it could work only 3 main sets would be needed using 60 frames for each (4 Gauges for each hand ) but then they still need to be duplicated for each hour as well so it would need about 288 gauges overlapping each other to get the full effect ? Unless there is some secret hidden code that Aida are not telling us here. on one of my gauge sets I use 3 gauges for different setting , I call it a hybrid as it changes range as the feed changes. If the hour only needed to read on the hour then it could be reduced to 196 gauges .... lol If your screen is connected using hdmi then you could just drag a widget over the top like a previous idea to show the weather as well ? Got the point. So it sounds kind of impossible with such tricks! @rinaldop also stopped reply so I got that it is not possible this way. Thank you 1 Quote Link to comment Share on other sites More sharing options...
GIGABYTE82 Posted February 14 Share Posted February 14 Grass_1176x664.sensorpanel 1 Quote Link to comment Share on other sites More sharing options...
Splash42 Posted February 15 Share Posted February 15 6 hours ago, TheNext said: Got the point. So it sounds kind of impossible with such tricks! @rinaldop also stopped reply so I got that it is not possible this way. Thank you It is possible just maybe not practicle . I suppose a type of fuzzy clock would not be to much loading say for 15min intervals ... Quote Link to comment Share on other sites More sharing options...
rinaldop Posted February 15 Share Posted February 15 On 2/13/2024 at 5:34 AM, Tony Lou said: I had a look but I can not see what I have to do sorry Before I change all of those missing sensors I want you to try something. Put your mouse over the blank area where a gauge should be then right click and select modify. A window will pop up that looks like this The stuff on the left side is all of the things on your computer that Aida64 can read and will be displayed. Pick one and that will be seen on the gauge on your screen. Try it 1 Quote Link to comment Share on other sites More sharing options...
rinaldop Posted February 15 Share Posted February 15 On 2/13/2024 at 9:12 PM, Splash42 said: I'm not sure how much resources it would use for every second , but if the PNG's are as simple as possible then it could work only 3 main sets would be needed using 60 frames for each (4 Gauges for each hand ) but then they still need to be duplicated for each hour as well so it would need about 288 gauges overlapping each other to get the full effect ? Unless there is some secret hidden code that Aida are not telling us here. on one of my gauge sets I use 3 gauges for different setting , I call it a hybrid as it changes range as the feed changes. If the hour only needed to read on the hour then it could be reduced to 196 gauges .... lol If your screen is connected using hdmi then you could just drag a widget over the top like a previous idea to show the weather as well ? I think you will need a lot more gauges than that since Aida64's clock counts seconds and does not reset until it reaches 86400 which is 24 hours. Quote Link to comment Share on other sites More sharing options...
rinaldop Posted February 15 Share Posted February 15 9 hours ago, TheNext said: Got the point. So it sounds kind of impossible with such tricks! @rinaldop also stopped reply so I got that it is not possible this way. Thank you 3 hours ago, Splash42 said: It is possible just maybe not practicle . I suppose a type of fuzzy clock would not be to much loading say for 15min intervals ... Here is a wonderful skin that I bought from BHSY_289 The clock in the center displays an image every 30 minutes and it does it by counting from 0-86399. The first panel counts from 0-26999, next from 28799-53999, 55799-80999, 82799-86399. The gap between each gauge is 1800 secs which is 30 minutes or 1 frame. 4 Quote Link to comment Share on other sites More sharing options...
Tony Lou Posted February 15 Share Posted February 15 11 hours ago, rinaldop said: Before I change all of those missing sensors I want you to try something. Put your mouse over the blank area where a gauge should be then right click and select modify. A window will pop up that looks like this The stuff on the left side is all of the things on your computer that Aida64 can read and will be displayed. Pick one and that will be seen on the gauge on your screen. Try it morning rinaldop thank you for getting back to me, I Put my mouse over the blank area where a gauge should be then right click and select modify and it come up with this and not one like your ? Quote Link to comment Share on other sites More sharing options...
Sensor Moderators Exhumed Posted February 15 Sensor Moderators Share Posted February 15 @Tony Lou It's a image! You can see ".png" in the path. Maybe there is no gauge or it's behind (under or above) the image object. Just open the sensorpanel manager and look for a image with this name. 1 Quote Link to comment Share on other sites More sharing options...
Sensor Moderators Exhumed Posted February 15 Sensor Moderators Share Posted February 15 Forum title is fixed in to "Share your Sensorpanel". I just found out how to edit this thing. So simple. 1 Quote Link to comment Share on other sites More sharing options...
Tony Lou Posted February 15 Share Posted February 15 45 minutes ago, Exhumed said: @Tony Lou It's a image! You can see ".png" in the path. Maybe there is no gauge or it's behind (under or above) the image object. Just open the sensorpanel manager and look for a image with this name. hello Exhumed rinaldop was the one who made it for me and I am just trying to get the dials to work as you can see in the picture and pic 2 and 3 are from manager if that helps Quote Link to comment Share on other sites More sharing options...
Surjeet Posted February 15 Share Posted February 15 9 minutes ago, Tony Lou said: hello Exhumed rinaldop was the one who made it for me and I am just trying to get the dials to work as you can see in the picture Yes @Exhumed is correct. On that "Sensorpanel manager" screen, various sensors are displayed. The list is displayed for all the sensors and items available on the sensor panel. You need to select the sensor name which is not working in your case. Please check if you are able to reach to that particular point! Lets do it step by step and we do not want you to overwhelmed with lots of steps 1 Quote Link to comment Share on other sites More sharing options...
Tony Lou Posted February 15 Share Posted February 15 13 minutes ago, Surjeet said: Yes @Exhumed is correct. Please select "SensorPanel Manager" instead of "Modify" on the same window (after right click) The SensorPanel Manager will open. On that screen, various sensors are displayed. The list is displayed for all the sensors and items available on the sensor panel. You need to select for the sensor name which is not working in your case. Please check if you are able to reach to that particular point! Lets do it step by step and we do not want you to overwhelmed with lots of steps morning ok I did that now I have the SensorPanel Manager open up ? Quote Link to comment Share on other sites More sharing options...
Surjeet Posted February 15 Share Posted February 15 2 minutes ago, Tony Lou said: morning what I'M trying to say is when I go On to my Sensor panel and right click where one of the dials are not working all i get when i right click i get a yellow dot line going all around the whole sensor not where i want to modify it? Do you know the name of the sensor which is not working: Example: CPU Temperature, CPU Utilization etc. You need to find that sensor name in the list in the "Sensorpanel manager" window. Please check what is not working and then select that sensor in the list and from there it can be modified and the other sensor or the sensor with other name can be assigned to that. 2 Quote Link to comment Share on other sites More sharing options...
Tony Lou Posted February 15 Share Posted February 15 1 hour ago, Surjeet said: Do you know the name of the sensor which is not working: Example: CPU Temperature, CPU Utilization etc. You need to find that sensor name in the list in the "Sensorpanel manager" window. Please check what is not working and then select that sensor in the list and from there it can be modified and the other sensor or the sensor with other name can be assigned to that. I do not no as I do not have all the files I just have the download file but when he show me a pic of it all of the dials was showing up at he's end, I just wish I had all the files as I can start all over again and move bits about etc Quote Link to comment Share on other sites More sharing options...
JariKoi Posted February 15 Share Posted February 15 @Tony Lou Did you ever watch this VIDEO that I already sent you once? Everything you can do and how is explained here. 1 Quote Link to comment Share on other sites More sharing options...
Tony Lou Posted February 15 Share Posted February 15 4 minutes ago, JariKoi said: @Tony Lou Did you ever watch this VIDEO that I already sent you once? Everything you can do and how is explained here. hello Jarikoi hope you are doing ok sorry I did see it but i think it would help me more if i had all the files to this sensor panel so I can put what I want in there and move bit about etc Quote Link to comment Share on other sites More sharing options...
JariKoi Posted February 15 Share Posted February 15 14 minutes ago, Tony Lou said: hello Jarikoi hope you are doing ok sorry I did see it but i think it would help me more if i had all the files to this sensor panel so I can put what I want in there and move bit about etc You have all files for that panel. You can't put more into it. Or you can fill it with sensors so that you can't find out anything. But in that video, you will see how you can add the sensor there yourself, which you are missing or not seeing now. I believe that you are not missing anything, but now you don't understand how you can replace sensors with others that you don't see. Video will help in this matter. Explore that panel manager and see what happens. You can always open current one again if you don't save over it. And when you understand how it works and get panel you want, then save it. 1 Quote Link to comment Share on other sites More sharing options...
Tony Lou Posted February 15 Share Posted February 15 25 minutes ago, JariKoi said: You have all files for that panel. You can't put more into it. Or you can fill it with sensors so that you can't find out anything. But in that video, you will see how you can add the sensor there yourself, which you are missing or not seeing now. I believe that you are not missing anything, but now you don't understand how you can replace sensors with others that you don't see. Video will help in this matter. Explore that panel manager and see what happens. You can always open current one again if you don't save over it. And when you understand how it works and get panel you want, then save it. ok here is the sensor panel manager and I can see red crosses next to them ? i take it that why bits or not working Quote Link to comment Share on other sites More sharing options...
JariKoi Posted February 15 Share Posted February 15 11 minutes ago, Tony Lou said: ok here is the sensor panel manager and I can see red crosses next to them ? i take it that why bits or not working They are headings of what is below them. So the sensors are divided as it says there. When there is a red cross, it is hidden so that it is not visible there in your panel. Press right mouse button on one of the sensors and select "hide or unhide". It will have a red cross in manager because it is hidden. They are there because it is easier to read panel manager and find the sensor you are looking for more easily. You can even remove them from the manager if they bother you. Click on the column with a red cross and delete it. I wish you would watch that video. 1 Quote Link to comment Share on other sites More sharing options...
Tony Lou Posted February 15 Share Posted February 15 4 minutes ago, JariKoi said: They are headings of what is below them. So the sensors are divided as it says there. When there is a red cross, it is hidden so that it is not visible there in your panel. Press right mouse button on one of the sensors and select "hide or unhide". It will have a red cross in the Manager because it is hidden. I wish you would watch that video. ok I will do but thank you for your help I will delete the pic now Quote Link to comment Share on other sites More sharing options...
rinaldop Posted February 15 Share Posted February 15 15 minutes ago, Tony Lou said: ok I will do but thank you for your help I will delete the pic now For now you can ignore the red items. Now that you have the sensor manager open left click on any non red item and select modify. Then the window with all the sensor types will appear. If the sensor is working it will show you what it is reading. If nothing is selected then that is a broken one. You need to go through them all until you find the broken ones. 1 Quote Link to comment Share on other sites More sharing options...
SanchoPancho Posted February 15 Share Posted February 15 20 hours ago, GIGABYTE82 said: Grass_1176x664.sensorpanel 243.36 kB · 5 downloads the grass is certainly noble!)) Quote Link to comment Share on other sites More sharing options...
Tony Lou Posted February 15 Share Posted February 15 1 hour ago, rinaldop said: For now you can ignore the red items. Now that you have the sensor manager open left click on any non red item and select modify. Then the window with all the sensor types will appear. If the sensor is working it will show you what it is reading. If nothing is selected then that is a broken one. You need to go through them all until you find the broken ones. ok will do thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.