Fiery Posted October 22, 2014 Share Posted October 22, 2014 We've implemented sensor support for Aquaero 4, Aquaero 5, Aquaero 6, Aquaduct Mark 2, Aquaduct Mark 3, Aquaduct Mark 4, and Aquaduct Mark 5 devices. We'll need to refine and extend the current sensor module, so please take the first AIDA64 beta as ... well, the first beta http://www.aida64.com/downloads/latesta64xebeta For Aquaero 4, Aquaduct Mark 2 and Aquaduct Mark 3, the following readings are available in the first beta: - 6 generic temperatures - 4 fan speeds (RPM) - 1 flow sensor (LPH -- litres per hour) For Aquaero 5, Aquaero 6, Aquaduct Mark 4, and Aquaduct Mark 5, the following readings are available in the first beta: - 16 generic temperatures - 4 fan VRM temperatures - 12 fan speeds - 4 flow sensors - 4 liquid level sensors (%) Fan VRM temperatures, flow sensors and liquid levels are only available on the Computer / Sensor page currently. As soon as the Aquaero sensor module gets more mature, we'll add the new type of readings to the rest of the AIDA64 hardware monitoring modules (e.g. OSD Panel, SensorPanel, LCD). Note: For Aquaero 5, Aquaero 6, Aquaduct Mark 4, and Aquaduct Mark 5 you need to have Firmware Revision 1036 or later to assure AIDA64 uses the proper register offsets for sensor readings. It may or may not work with older firmware releases. Please let us know how it works on your Aquaero/Aquaduct device. Note that Aquaeros/Aquaducts are very complicated devices, so we'll need a bit more time to put every piece of the puzzle together. Let me know if you miss anything from the current capabilities of the Aquaero/Aquaduct sensor solution. Thanks, Fiery Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.