Share your Sensorpanels

[Kryogenus]

On 7/23/2024 at 9:12 PM, catkinson633 said:

Alright the design work for BomberCommand is now complete! 

Here is the design in Orange & White for 515x1920 which I should have ready in the next day or two.

Before I go further , just wondering if anyone wants to use this design (perhaps in a different size ) on their machine, and if so what sizes are you after?

1920X480 . Thanks.

[FlanksOP]

On 10/12/2023 at 7:16 AM, usfpaul82 said:

Hey all.  I am new to this and took a few bits from a handful of templates I found in this thread to created my own version of the Clean White in 480X800.  Thanks to all the original creators!  Let me know what you think.

 

 

where is the link brah

[zketizk]

Em 25/07/2024 às 13:43, catkinson633 disse:

Dear user, your post has been edited and the attachments have been removed for the following reasons:

• We discussed this here at HQ and decided that donations should only be mentioned in the "Promote your SensorPanel" topic. The "Share your Sensorpanels" topic should not be used for selling, promoting donations, or any commercial activities.

Embora eu entenda seus objetivos e dedicação ao grupo de caridade que você apoia, não posso esquecer o fato de que seu painel era totalmente gratuito no começo, então você editou a postagem original, removendo o arquivo anexado, e começou a promover a versão "paga", onde a "gratuita" tem marca d'água.

 

Edited July 31 by COSTAJUNIOR

[MadMartin]

4 hours ago, catkinson633 said:

It's a fair point. I will but back 2 unwatermarked versions.  The others though I will ask folks to donate for. I think that's fair don't you?

if i was you i would ask if thats allowed as some might see you asking to donate could come under the same as paid version which could get you into trouble 

[Troy Ashcraft]

ok soooo where is the effing file???

 

[zketizk]

13 hours ago, catkinson633 said:

It's a fair point. I will but back 2 unwatermarked versions.  The others though I will ask folks to donate for. I think that's fair don't you?

That is fair, but, as @MadMartin said, be sure to check forum posting guidance.
It's not allowed to promote paid versions on this thread, as there is a separate one for $$.

8 hours ago, Troy Ashcraft said:

ok soooo where is the effing file???

 

Chill bro, chill. Why so edgy?

[Loyd]

hate to say this but @MadMartinhas a point. best you go to the promote section.  even thou you do not make money the panels are not free.  besides these panels are a lot of work

[abdullah sayegh]

On 3/26/2024 at 5:20 AM, JPetrillo13 said:

My latest update for @ThatManOnTheMoon's original sensorpanel, lots of edits to fit in my secondary vertical screen 768 x 1366 and lots of custom things too.

 

 

[Renatomartins253]

11 hours ago, abdullah sayegh said:

 

 

[ZeldaLink88]

Just finished changing my sensor panel, since my old display died and the new one has a different resolution. I have not fully tested it yet.

Years ago I downloaded a template from here, it fits my setup. Anyway, here it is. Resolution is 1280 x 800.

I have added the file as well, if someone is interested.

 

2024-07-30.sensorpanel

[peebksee]

Hello guys, do you have a theme look like this but in white background and black fonts for AX206 panel?

Thank you!

[Loyd]

how do I get the new vials for my panels?

 

[Loyd]

27 minutes ago, Loyd said:

how do I get the new vials for my panels?

never mind I figured it out

 

 

[COSTAJUNIOR]

On 7/27/2024 at 10:12 PM, MadMartin said:

if i was you i would ask if thats allowed as some might see you asking to donate could come under the same as paid version which could get you into trouble 

We discussed this here at HQ and decided that donations should only be mentioned in the "Promote your SensorPanel" topic. The "Share your Sensorpanels" topic should not be used for selling, promoting donations, or any commercial activities.

[Glyapa19]

On 2/4/2024 at 4:46 AM, Swatgod said:

I finished my panel until i finish building my water cooling system. It uses a rslcd file so it can use the gifs it came with. i also made my own version of the rslcd viewer that has no stability issues and uses absolute minimal system resources. if interested in using, just let me know.

 

[FANNATTIC]

Skin download? 

[cesarjapa79]

7 hours ago, Glyapa19 said:

 

I want! what resolution?

[Miicker]

On 2/22/2022 at 12:13 AM, Lucas S. Bezerra said:

I made a vertical version of the layout I had developed, I changed the cabinet to a Corsair 5000D and I saw this need

I know this is an old post, but out of all the sensorpanels, this is by far the best one. Would it be possible to make a 1920*480 (horizontal) one?

[FANNATTIC]

Cade o link de download? 

[Eezy]

Sharing my work-in-progress panel. Still trying some ideas for some custom gauges that fit the theme. The whole design is pretty basic tho, if you got any ideas I'll gladly hear them out. 

 

[Miicker]

Since the creator has nog logged in for a long time, I changed the sensorpanel myself. @Lucas S. Bezerra is the original creator, so all props to him.

Here is the 1920x480 variant.

During load:

 

During idle:

 

Sensorpanel file:

clean panel.sensorpanel

[David26]

Guys I need your help, I have a problem with aida64 templates in 1920x480 resolution, the problem is that any template of this resolution all the numbers, letters and backgrounds move and are not centered like the ones I see here. How can I do? thank you very much for your help

I posted some example photos, they all come out like this when I set the panel resolution to 1920x480 Grazie mille per il vostro aiuto

[Danilo]

On 02/08/2024 at 13:49, Miicker said:

Como o criador não está logado há muito tempo, eu mesmo troquei o sensorpanel.@Lucas S. Bezerra é o criador original, então todos os créditos são para ele.

Aqui está a variante 1920x480.

Durante o carregamento:

 

Durante o modo inativo:

 

Arquivo Sensorpanel:

painel limpo.sensorpanel 7,06 MB · 31 downloads

Is 480 x 1920 possible?

[Miicker]

1 hour ago, Danilo said:

Is 480 x 1920 possible?

I am not going to make it, since I am not using my screen vertical, you can create it yourself if you want.

[Loyd]

6 hours ago, David26 said:

Guys I need your help, I have a problem with aida64 templates in 1920x480 resolution, the problem is that any template of this resolution all the numbers, letters and backgrounds move and are not centered like the ones I see here. How can I do? thank you very much for your help

I posted some example photos, they all come out like this when I set the panel resolution to 1920x480 Grazie mille per il vostro aiuto

Panel work only on the original resolution and only if your display is set to 100% scale. and you have to have the font loaded before loading the panel.