Fiery

You can try disabling the following options on the Stability page in AIDA64 / main menu / File / Preferences, although I don't think it would accelerate startup considerably. Apple SMC sensor support Dell SMI sensor support Koolance TMS-200 sensor support T-Balancer sensor support Toshiba TVALZ sensor support The delays are most definitely caused by the RAID scanning, but since you have a RAID array in your system, disabling that feature may not be the best idea Regards, Fiery

No, I don't think you should be so drastic First try to contact EVGA and ask them about the E-LEET CPU temperature reading discrepancy vs. BIOS Setup readings. If they supply you with a fixed EVGA E-LEET, then the CPU reading may come from the same wrong place in E-LEET and AIDA64, and the BIOS Setup provides the best values. In such case we'll also fix AIDA64

We've checked other E699 logs, and it seems only yours have such issues about CPU temperature readout. We've also checked our code about E699, to make sure AIDA64 reads the proper register, but it looks fine. Do you have the same high CPU temperature readings in the BIOS Setup and in EVGA E-LEET? If yes, then it seems to be either a BIOS issue or a temperature diode malfunction.

Thank you for the feedback

On MSI X58M SLI it could be a secondary CPU temperature or the north bridge temperature. Hard to tell, since it depends on the motherboard design.

Thank you. Please upgrade to the latest beta version of AIDA64 Extreme Edition available at: http://www.aida64.com/downloads/aida64extremebuild2447jx5ym0bnwgzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.

Thank you. Please upgrade to the latest beta version of AIDA64 Extreme Edition available at: http://www.aida64.com/downloads/aida64extremebuild2447jx5ym0bnwgzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works

As I've explained above, we believe AIDA64 reports both values (VID and actual Vcore) properly, it's only a matter of which value do you look at. So IMHO there's no need to fix anything in AIDA64.

We've checked it, and it would require D3D hooking, which is also required for full-screen OSD and FPS measurement BTW. We currently have no plans to deal with D3D hooking I'm afraid

VRM is the Voltage Regulator Module, so its power draw shows the power going through that component of your video card. Regards, Fiery

We've tried it with two SSDs in a RAID0 array on a Z77-based motherboard, but it worked flawlessly for us. Can you please tell us more about your configuration? Do you have any RAID arrays defined? Is your SATA controller configured to IDE, AHCI or RAID mode?

DLL is not suitable for us I'm afraid What we'd need is explanation on the usage of the USB HID interface, so we could communicate with the device directly, without any external modules.

Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic. Thanks, Fiery

Have you tried it with the latest beta version of AIDA64 Extreme Edition? http://www.aida64.com/downloads/aida64extremebuild2440kn0rzpwgflzip

We've fixed the No Disk error in the latest beta version of AIDA64 Extreme Edition available at: http://www.aida64.com/downloads/aida64extremebuild2440kn0rzpwgflzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let us know how it works.

AIDA64 does not currently support USB temperature sensors. If there's a programming manual (datasheet, SDK, etc) available for the mentioned device, and we can purchase the hardware online or in a local store, then we may be able to add it to AIDA64.

AFAIK = As far as I know

AFAIK Crucial M4 SSDs do not feature a temperature diode.

Please upgrade to the latest beta version of AIDA64 Extreme Edition available at: http://www.aida64.com/downloads/aida64extremebuild2435fb9hzn7gqvzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.

There's something wrong with RST 12.6, since it works on several systems with AIDA64, but not on some other systems. Whereas RST 12.5 seems to be more reliable and more consistent. We'll need to wait for a new 12.6 update to see if anything needs to be done on our end.

For such UEFI systems video BIOS version and release date are displayed on the Display / GPU page.

Thank you for the feedback, glad it works better

It's not quite easy to measure CPU VID while building up the SensorPanel, since it takes a lot of CPU cycles to render the SensorPanel itself, and that tend to make the CPU switch to higher clock (and VID) levels meanwhile. Anyway, we've improved on the CPU VID measurement in the latest beta version of AIDA64 Extreme Edition available at: http://www.aida64.com/downloads/aida64extremebuild2435fb9hzn7gqvzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps. Thanks, Fiery

The mentioned new AIDA64 beta release is available for download at: http://www.aida64.com/downloads/aida64extremebuild2435fb9hzn7gqvzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works.

Thank you for the feedback. We've been trying to reproduce the No Disk issue in the past weeks on many different configurations, now with flash drives and external HDDs as well, but with no luck. We're starting to wonder whether it may be a software or driver issue rather than a hardware issue. Maybe you have a software installed that causes Windows to pop that message up? BTW, do you dismount the drive first and only after then you disconnect it physically from the computer? Or you just unplug the USB cable and that's it? Is it a USB2 or USB3 drive? Does it have NTFS or FAT partition(s)?