Jump to content

Share your Sensorpanels


Mice007

Recommended Posts

9 minutes ago, Tony Lou said:

hello Exhumed  rinaldop was the one who made it for me and I am just trying to get the dials to work as you can see in the picture

20240215_132159.jpg

Yes @Exhumed is correct.

On that "Sensorpanel manager" screen, various sensors are displayed. The list is displayed for all the sensors and items available on the sensor panel.

You need to select the sensor name which is not working in your case.

Please check if you are able to reach to that particular point!
 

Lets do it step by step and we do not want you to overwhelmed with lots of steps :)

 

  • Thanks 1
Link to comment
Share on other sites

13 minutes ago, Surjeet said:

Yes @Exhumed is correct.

Please select "SensorPanel Manager" instead of "Modify" on the same window (after right click)

The SensorPanel Manager will open. On that screen, various sensors are displayed. The list is displayed for all the sensors and items available on the sensor panel.

You need to select for the sensor name which is not working in your case.

Please check if you are able to reach to that particular point!
 

Lets do it step by step and we do not want you to overwhelmed with lots of steps :)

 

morning   ok I did that now I have the SensorPanel Manager open up ?

Link to comment
Share on other sites

2 minutes ago, Tony Lou said:

morning  what I'M trying to say is when I go On to my Sensor panel and right click where one of the dials are not working all i get when i right click i get a yellow dot line going all around the whole sensor not where i want to modify it?

Do you know the name of the sensor which is not working: Example: CPU Temperature, CPU Utilization etc.

You need to find that sensor name in the list in the  "Sensorpanel manager" window.

Please check what is not working and then select that sensor in the list and from there it can be modified and the other sensor or the sensor with other name can be assigned to that.

  • Thanks 2
Link to comment
Share on other sites

1 hour ago, Surjeet said:

Do you know the name of the sensor which is not working: Example: CPU Temperature, CPU Utilization etc.

You need to find that sensor name in the list in the  "Sensorpanel manager" window.

Please check what is not working and then select that sensor in the list and from there it can be modified and the other sensor or the sensor with other name can be assigned to that.

I do not no as I do not have all the files I just have the download  file but when he show me a pic of it all of the dials was showing up at he's end, I just wish I had all the files as I can start all over again and move bits about etc

 

 

Link to comment
Share on other sites

4 minutes ago, JariKoi said:

@Tony Lou Did you ever watch this VIDEO that I already sent you once? Everything you can do and how is explained here. 

 

hello Jarikoi hope you are doing ok sorry I did see it but i think it would help me more if i had all the files to this sensor panel so I can put what I want in there and move bit about etc

Link to comment
Share on other sites

25 minutes ago, JariKoi said:

You have all files for that panel. You can't put more into it. Or you can fill it with sensors so that you can't find out anything. But in that video, you will see how you can add the sensor there yourself, which you are missing or not seeing now. I believe that you are not missing anything, but now you don't understand how you can replace sensors with others that you don't see. Video will help in this matter. Explore that panel manager and see what happens. You can always open current one again if you don't save over it. And when you understand how it works and get panel you want, then save it.

ok here is the sensor panel manager and I can see red crosses next to them ? i take it that why bits or not working 

 

 

Link to comment
Share on other sites

4 minutes ago, JariKoi said:

They are headings of what is below them. So the sensors are divided as it says there. When there is a red cross, it is hidden so that it is not visible there in your panel. Press right mouse button on one of the sensors and select "hide or unhide". It will have a red cross in the Manager because it is hidden. I wish you would watch that video. 

ok I will do but thank you for your help I will delete the pic now 

Link to comment
Share on other sites

15 minutes ago, Tony Lou said:

ok I will do but thank you for your help I will delete the pic now 

For now you can ignore the red items. Now that you have the sensor manager open left click on any non red item and select modify. Then the window with all the sensor types will appear. If the sensor is working it will show you what it is reading. If nothing is selected then that is a broken one.

You need to go through them all until you find the broken ones.     

  • Thanks 1
Link to comment
Share on other sites

1 hour ago, rinaldop said:

For now you can ignore the red items. Now that you have the sensor manager open left click on any non red item and select modify. Then the window with all the sensor types will appear. If the sensor is working it will show you what it is reading. If nothing is selected then that is a broken one.

You need to go through them all until you find the broken ones.     

ok will do thank you 

Link to comment
Share on other sites

On 2/15/2024 at 2:54 PM, rinaldop said:

I think you will need a lot more gauges than that since Aida64's clock counts seconds and does not reset until it reaches 86400 which is 24 hours. 

Yes the Total for a second hand would be 5760 gauges and I think it maybe the most over build clock ever. ha ha

Link to comment
Share on other sites

On 12/19/2022 at 7:35 PM, Seminole81 said:

Thanks for this. I've edited it slightly, increased some of the sizes and changed it to a greyscale.

One thing I did notice was that the font file wasn't in the download. I think it's Orbitron (Orbitron - Google Fonts) though. I also didn't manage to change the background text sadly as it was a flattened image. I'd prefer to use my own labels as I have 2 M.2 drives and no SSD. Still works and looks lovely though.

Might give a RGB version a bash.

image.thumb.png.335b213f8e50dddfc57916fccc6eba21.png

 

 

1322161061_BWROGTheme.zip 4.72 MB · 447 downloads

This is by far the nicest ROG theme set I've ever seen!

Link to comment
Share on other sites

On 2/2/2021 at 8:39 PM, braintez said:

Finally got my panel in the mail.  Took a little more than a week with expedited shipping from China to the US.  What an awesome little display!  The attached zip contains the theme as well as the required fonts. 

I made some changes since the initial post to take into account the size of the actual screen.  Resolution isn't the issue, more finding the right font size and making more efficient use of the display area.

The animation effect in the video preview isn't anything groundbreaking.  It's basically Steam Wallpaper Engine running in the background, with transparency for the SensorPanel set to 20%.  It adds a little something to the overall theme, IMO. 

I managed to find the right part on Amazon to allow mounting via PCI bracket.  Very pleased with the way the installation and panel design turned out.

Thanks to all of the creative minds who have contributed their ideas and innovations to this community!

 

Case-1.jpg

Case-2.jpg

Aida Spy - 1920x480.zip 271.76 kB · 1126 downloads

Three years later, it's great to see that so many of you have either installed this panel, or have added your own creative twists to it!  I have to admit that when I see it on various LCD ads on Aliexpress or installed on various rigs on my favorite YouTube content creator channels, I can't help to think about this community since this is where it all started.

I recently upgraded my PC and have also purchased a newer panel with a higher resolution.  So I decided to shake the dust off and update this for the 3840 x 1100 crowd.  Took some elements away since they're no longer applicable for my build and added a couple graphs, to see a trend more than than the actual stats.  Of course, all of this is editable but years later, these are the specs I care about most on my new sim racing rig!

This is the display I purchased:  https://www.aliexpress.us/item/3256802095834764.html (monitor no touch)

As with the rest of the panels I've uploaded, these are all meant to be free and shared with the community.  That was the original intention, and that still hasn't changed.  Keep it moving, everyone!!

 

Preview.jpg

Return of Spy.zip

  • Like 4
  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...