Surjeet Posted May 20 Share Posted May 20 18 minutes ago, Mask Blue said: I created a button with 100 states and would like to assign the VOLTS and WATTS sensors to this button, but I don't know which values to assign in the minimum value and maximum value fields. I tried some combinations, but without success. Is it possible to assign these values? If anyone can help, I would be very grateful. Yes, this is possible! 100 States are the best way to present the precision !! Before we start: 100 states for VOLTS is a huge number (Ideally 20 to 30 states are enough for VOLTS). However, 100 can still be applied, dont worry For WATTS whats your range? do you want to show 0-200W or 0 -300 W? Quote Link to comment Share on other sites More sharing options...
Mask Blue Posted May 20 Share Posted May 20 2 hours ago, Surjeet said: Yes, this is possible! 100 States are the best way to present the precision !! Before we start: 100 states for VOLTS is a huge number (Ideally 20 to 30 states are enough for VOLTS). However, 100 can still be applied, dont worry For WATTS whats your range? do you want to show 0-200W or 0 -300 W? Thank you very much for your help, my friend. So, I want to use the value from 0 to 200 for watts. Quote Link to comment Share on other sites More sharing options...
Surjeet Posted May 21 Share Posted May 21 11 hours ago, Mask Blue said: Thank you very much for your help, my friend. So, I want to use the value from 0 to 200 for watts. Here we go. These values should work: 0 30 28 58 56 86 84 114 112 142 140 170 168 198 196 226 1 Quote Link to comment Share on other sites More sharing options...
Mask Blue Posted May 21 Share Posted May 21 5 hours ago, Surjeet said: Here we go. These values should work: 0 30 28 58 56 86 84 114 112 142 140 170 168 198 196 226 Thank you very much for your help, but I added these values and it didn't work correctly. For example, the button doesn't move as the volts and watts sensor changes. In the values you sent, shouldn't there be a point after the decimal place? Quote Link to comment Share on other sites More sharing options...
Surjeet Posted May 21 Share Posted May 21 5 hours ago, Mask Blue said: Thank you very much for your help, but I added these values and it didn't work correctly. For example, the button doesn't move as the volts and watts sensor changes. In the values you sent, shouldn't there be a point after the decimal place? You're welcome. My pleasure!! It should work for Watts if you are using 100 images. For volts, please provide me the range as it varies between 0-2v or 0-3v and in that case, above values are too big to handle volt sensor! Quote Link to comment Share on other sites More sharing options...
Danilo Posted May 21 Share Posted May 21 On 02/05/2024 at 10:43, rinaldop said: Aqui está a versão original, basta clicar no arquivo abaixo. Could you share in 480 x 1920 format? Quote Link to comment Share on other sites More sharing options...
Danilo Posted May 21 Share Posted May 21 On 02/11/2022 at 23:19, viawings said: Fiz um inspirado no design temático do painel retrô. Link para o original aqui. Resolução 1920x480. Could you share? 3 Quote Link to comment Share on other sites More sharing options...
rinaldop Posted May 22 Share Posted May 22 21 hours ago, Danilo said: Could you share in 480 x 1920 format? I am sorry but resizing panels is a lot of work because you need to resize and then move every item by hand and that takes a lot of time. I do not have the time to do it for free. Quote Link to comment Share on other sites More sharing options...
theGaz Posted May 22 Share Posted May 22 Need help. Trying to change a panels cpu/gpu name etc. in photoshop but text not updating. Could someone give me a link on this site to modifying panels help. Thanks. Quote Link to comment Share on other sites More sharing options...
rinaldop Posted May 23 Share Posted May 23 On 5/21/2024 at 2:55 PM, Danilo said: Could you share? Here it is https://themely.dev/listing/retropanel-sensorpanel/ Quote Link to comment Share on other sites More sharing options...
Sensor Moderators COSTAJUNIOR Posted May 23 Sensor Moderators Share Posted May 23 9 hours ago, theGaz said: Need help. Trying to change a panels cpu/gpu name etc. in photoshop but text not updating. Could someone give me a link on this site to modifying panels help. Thanks. I noticed that in the area highlighted in red in the upper right corner, the action is being performed incorrectly. You need to click on the text "ASUS DUAL RTX 3070 OC" and then enter your text. The way it is currently being done, you are only renaming the layer. 1 Quote Link to comment Share on other sites More sharing options...
theGaz Posted May 23 Share Posted May 23 1 hour ago, COSTAJUNIOR said: I noticed that in the area highlighted in red in the upper right corner, the action is being performed incorrectly. You need to click on the text "ASUS DUAL RTX 3070 OC" and then enter your text. The way it is currently being done, you are only renaming the layer. Thanks for your help. I cannot select text in upper right corner. I dont think its a text box. I think its all one image. Thanks again. Quote Link to comment Share on other sites More sharing options...
JariKoi Posted May 23 Share Posted May 23 Post removed by JariKoi 1 Quote Link to comment Share on other sites More sharing options...
theGaz Posted May 23 Share Posted May 23 41 minutes ago, JariKoi said: Send psd file here so we can look at it. Thanks for having a look. Clean Dark RGB.psd Quote Link to comment Share on other sites More sharing options...
Elius Posted May 23 Share Posted May 23 I am adding my sensor panel 1 Quote Link to comment Share on other sites More sharing options...
JariKoi Posted May 23 Share Posted May 23 Post removed by JariKoi 1 Quote Link to comment Share on other sites More sharing options...
rinaldop Posted May 23 Share Posted May 23 4 hours ago, Liao Joey said: Why did you spread my works without my permission? I forgot that when you posted your template that you did not make it public. I will remove the link now. Quote Link to comment Share on other sites More sharing options...
theGaz Posted May 23 Share Posted May 23 Thanks JariKoi Quote Link to comment Share on other sites More sharing options...
theGaz Posted May 23 Share Posted May 23 7 hours ago, JariKoi said: Yes, you can edit that normally. All texts and images are editable.. I edited it a bit. OK then. Guess I better start a PS course! Great site Great people! Cheers Thanks JariKoi 1 Quote Link to comment Share on other sites More sharing options...
JariKoi Posted May 23 Share Posted May 23 Post removed by JariKoi Quote Link to comment Share on other sites More sharing options...
BHSY Posted May 24 Share Posted May 24 Contents removed by BHSY_289 1 Quote Link to comment Share on other sites More sharing options...
HandOverFist Posted May 24 Share Posted May 24 14 hours ago, BHSY_289 said: I just came across your post today. Please remove all your posts and links associated with these scale images. I am the original creator, BHSY_289 for creating these scale images. I sold my panel skin to Rinaldop and he had my permission to modify the gauge for his friend which he paid me for but you shouldn't post it and share it. Thanks I paid him for the image and that is all I know about it. That was my image I supplied to him. Have the mods remove it if it's not allowed. Thanks Quote Link to comment Share on other sites More sharing options...
HandOverFist Posted May 24 Share Posted May 24 12 hours ago, Halfcutt said: Just wow. Members such as you and a few others are the reason for the erosion and downfall of this community and thread. Prior to sensor panels being offered for sale in this forum, this thread thrived. Pretty much a skeleton now. Activity is less than half it was before. Yeah, I'm pretty much done here after the ridiculous post by a mod threatening a ban when a simple message could have cleared it up easily. Quote Link to comment Share on other sites More sharing options...
Sensor Moderators COSTAJUNIOR Posted May 24 Sensor Moderators Share Posted May 24 1 hour ago, HandOverFist said: Yeah, I'm pretty much done here after the ridiculous post by a mod threatening a ban when a simple message could have cleared it up I'm sorry you feel that way. The moderator's action was taken based on the community guidelines that we all need to follow to maintain a respectful and safe environment for all members. The threat of a ban was made because there was a rule violation that was considered serious. We understand that a simple message could have cleared up the situation, but the severity of the infraction required an immediate and firmer response. We hope this clarifies the situation. 2 Quote Link to comment Share on other sites More sharing options...
Vimyscout Posted May 24 Share Posted May 24 1920 x 480 Font included Have a good one ! Light1.sensorpanel Android Assassin.otf 9 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.