Jump to content

Recommended Posts

Posted
On 4/7/2024 at 8:35 PM, ValhallasAshes said:

Yes, system fan in my template is referring to my chassis fans as controlled by my Lian-Li L-Connect 3 software.  I have no idea what that bar in the Fans & Pump section in the image you posted is for...Fan speed percentage maybe?  Loop fluid temperature?  Not sure, but it looks like filler to me.  Probably just to not leave a blank space.  As for what they did to their template as a whole, it simply looks like mine but with using the standard font instead of the GeForce font.  Other than re-adding the date to the top bar and the changed fan/pump entries, it looks like a 1:1 of my template.

I hope this helps.

Hey, yes it helps, thanks! I have changed your template a bit, work in progress, im building a new PC and i still need to buy my GPU, the 7" screen will arrive too in about two weeks, till then i can change a bit the template. I have been adding wattage under the CPU's tempereature, i want to know how much power is drawing the CPU and the GPU, i will change GPU Hot Spot temp with the tab where is the power draw and i will add power drawing for the GPU too like i did for the CPU. Im attaching a picture too and thanks for this template, its the best for me!

 

SensorPanel.thumb.jpg.cccf474117da271cccbdfd3f1aa94d0c.jpg

2 hours ago, NereusH said:

Very similar to the one you showed. Been using this for a very long time and nothing beats its simplicity and volume of information, in my opinion.

I am not sure who the OP was, all credits to that person. I made some few tweaks according to my liking. 1024x600.

2024-03-12.sensorpanel 56.19 kB · 2 downloads

 

Hello, cool and thanks for sharing but i will use the template i attached a picture of it above, i need the FPS count badly but yours looks very nice too!

  • Like 1
Posted
On 28/11/2023 at 04:17, keatontodd3 said:

có ai có file của panel này không? nó thực sự thu hút sự chú ý của tôi và tôi thực sự muốn sử dụng nó

image.thumb.png.56d8f61b519d9bc007c7e15e3825c65d.png

I also want to find this panel !

Thanks for your sharing @@

Posted
On 4/7/2024 at 7:16 PM, rinaldop said:

CPU temperature and utilization, GPU temperature and utilization, fan speeds.   

Hiya Rinaldop how do I do the fans speeds? as up to now i got 

CPU TEMP, GPU TEMP, CPU UT, GPUI  + Motherboard TEMP 

Posted
2 hours ago, Tony Lou said:

Hiya Rinaldop how do I do the fans speeds? as up to now i got 

CPU TEMP, GPU TEMP, CPU UT, GPUI  + Motherboard TEMP 

Just go to the fan section of the sensors, it is near the bottom. I say do a CPU, GPU, and a case fan and do min of 0 and max of 3000.  

  • Like 1
Posted
4 hours ago, rinaldop said:

Just go to the fan section of the sensors, it is near the bottom. I say do a CPU, GPU, and a case fan and do min of 0 and max of 3000.  

ok I had a look and I just got these ones so I click on fan speeds but it will not let me click on ok as it is greyed out

fans.png

fan.png

Posted
2 hours ago, Tony Lou said:

ok I had a look and I just got these ones so I click on fan speeds but it will not let me click on ok as it is greyed out

BHSY_289 is correct.  Select the exact fan that you want to use not the category.

  • Sensor Moderators
Posted
2 hours ago, Tony Lou said:

sorry i do not no what you mean 😞

image.png.c6ad62e141e27e3cc4d54e8072ed91ee.png

Arrows = sensors

All sensors are listed according to category. What you click on there is the category and not a sensor. Logically, the display doesn't work because there is no sensor behind it or selected.

  • Thanks 1
Posted

ok here is what I am working on  it is my First Attempt to do a Sensor Panels  as in the Modify Item I Do Not No What Each of them  are or what you have to have in the list lol

So It Is Going To Be for Rossi Fans  it will be 515 x 1920 hope you like as I have a bit more to do be for I share it

also i can not do the fams 

 

 

Screenshot 2024-04-14 095402.png

Posted
7 minutes ago, Exhumed said:

image.png.c6ad62e141e27e3cc4d54e8072ed91ee.png

Arrows = sensors

All sensors are listed according to category. What you click on there is the category and not a sensor. Logically, the display doesn't work because there is no sensor behind it or selected.

I think I got it now I will have a go 

Posted
1 minute ago, BHSY_289 said:

It seems that your AIDA64 did not detect your CPU fan. Is your CPU fan connected to a CPU fan header or case fan header? I don't see any case fan sensor in your AIDA64 either.

hello I have a  

ASUS ROG Ryujin III 360 ARGB WHT All-in-one Liquid CPU Cooler with 360mm Radiator. 

Asetek 8th gen Pump, 3X Magnetic 120mm ARGB Fans (Daisy Chain Design), 3.5” LCD Display, White

and it is connected to my MOTHERBOARD    

Posted
51 minutes ago, BHSY_289 said:

 

A diagram of my motherboard:motherboard.thumb.jpg.23157d9f10da4d3da588caf48036171a.jpg

If I used a CPU pump, I would recommend connecting it to a pump header or normal sys fan header. CPU fan should connect to a CPU fan header. This allows your motherboard to control the fan speeds relative to the CPU temperature. So my guess is your CPU fan was not connected to the CPU fan header, maybe that's why AIDA64 was not able to detect it.

 

My Motherboard.png 

ok here is my one & the fans I have are 9 of them Lian-Li UNI FAN AL120 V2 ARGB PWM Lüfter, 3er Pack inkl. Controller - 120mm,

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...