Share your Sensorpanels

[PVRV333]

On 5/30/2024 at 8:07 PM, JVNTR said:

New to Aida64 and to sensor panels in general.  This is my first attempt at it on my new pc build.

This is awesome!! Can you post it please? Thanks

[Johnamaoamiao]

Please, can anyone share a 720x2560 panel? I've been searching but with no luck to find one. Thanks in advance!

[JariKoi]

Post removed by JariKoi

[Hundredd]

On 6/1/2024 at 12:35 AM, Danilo said:

Van lehetőség 480 x 1920 formátumban történő megosztásra?

And 1920x1080 ?

[rinaldop]

1 hour ago, Hundredd said:

And 1920x1080 ?

Here

https://forums.aida64.com/search/?q="1920x1080"&quick=1&type=forums_topic&item=13296

[Mitiaychik]

I made myself a socket for a second monitor. Please don't kick me - this is my first experience. Enjoy it for your health. P.S. I won’t edit or change anything, change and modify yourself 8-)

Panelka vidjetov.sensorpanel

[Vimyscout]

1920 x 480

'Android Assassin' font can be found in previous post

 

Thanks for looking

HUD 20.sensorpanel

[Dropcheck]

On 5/30/2024 at 9:13 PM, Eze2kiel said:

My SensorPanel updated to date!
I added 2 more RAMs and modified some things.

 

I leave comparative images of the previous one with the updated one.

The light image behind the woven wire is a 100 state gauge.

Nice!  Would you consider posting your sensorpanel file?

[SpiffyIuy]

 

 

[KingDeViL]

Hi guys. I buy a new 8.8'' screen 1920x480. I need best sensor panel please ? 

[JVNTR]

On 6/6/2024 at 3:11 PM, PVRV333 said:

This is awesome!! Can you post it please? Thanks

Enjoy!Cowboy Bebop Sensor Panel.zip

[JVNTR]

On 6/6/2024 at 3:11 PM, PVRV333 said:

This is awesome!! Can you post it please? Thanks

In case you want my updated one.

 

 

Cowboy Bebop Sensor Panel V2.zip

[rinaldop]

6 hours ago, KingDeViL said:

Hi guys. I buy a new 8.8'' screen 1920x480. I need best sensor panel please ? 

Look through these

https://forums.aida64.com/search/?q="1920x480"&quick=1&type=forums_topic&nodes=28

[KingDeViL]

I use Sensor panel + wallpaper engine combine :))

 

 

 

 

 

[Arbit]

On 5/20/2024 at 1:41 PM, Mask Blue said:

I created a button with 100 states and would like to assign the VOLTS and WATTS sensors to this button, but I don't know which values to assign in the minimum value and maximum value fields. I tried some combinations, but without success. Is it possible to assign these values? If anyone can help, I would be very grateful.

Why would you make a button with 100 states? 16 states will give you fluid motion in almost all sensor graphs without bogging down your panel with extra images or crap.  Plus, it's a nightmare to manage if you want to make a change in the image files.  16 (standard on AIDA) is a standard for a reason.  Even if you reduced it to 50, do you think you would notice the bar graph or sensor line 1 click off?  Not a chance.  My strong recommendation is to not waste your time or energy in going above 16.

To answer your real question without all the hyperbole, take 100 and divide by the sensor images you want.  You will have to have multiple sensors right on top of each other matched exactly on the x and y axis.  You will need 8 sensors in your case. The first sensor would have images and states for 1-15, the second would be 16-32, the third would be....

Set the first image in the first sensor to be 0 for the low and 0 for the high setting. The second image would be 2-2 until you hit 15.  On the the next overlayed sensor 16-16, 17-17 until you hit 31. On to the third and repeat until you hit 100.  

Its going to be tough not to mess up integrating all 100 images and states without messing it up.  I struggle with 16.

 

Good luck with your endeavor.

[rinaldop]

1 hour ago, Arbit said:

Why would you make a button with 100 states? 16 states will give you fluid motion in almost all sensor graphs without bogging down your panel with extra images or crap.  Plus, it's a nightmare to manage if you want to make a change in the image files.  16 (standard on AIDA) is a standard for a reason.  Even if you reduced it to 50, do you think you would notice the bar graph or sensor line 1 click off?  Not a chance.  My strong recommendation is to not waste your time or energy in going above 16.

To answer your real question without all the hyperbole, take 100 and divide by the sensor images you want.  You will have to have multiple sensors right on top of each other matched exactly on the x and y axis.  You will need 8 sensors in your case. The first sensor would have images and states for 1-15, the second would be 16-32, the third would be....

Set the first image in the first sensor to be 0 for the low and 0 for the high setting. The second image would be 2-2 until you hit 15.  On the the next overlayed sensor 16-16, 17-17 until you hit 31. On to the third and repeat until you hit 100.  

Its going to be tough not to mess up integrating all 100 images and states without messing it up.  I struggle with 16.

 

Good luck with your endeavor.

I have no idea where you got your numbers from but they make no sense. Here is a simple table with the way to set up the 8 sensors needed.

 

[rinaldop]

On 6/12/2024 at 9:57 AM, Arbit said:

Why would you make a button with 100 states? 16 states will give you fluid motion in almost all sensor graphs without bogging down your panel with extra images or crap.  Plus, it's a nightmare to manage if you want to make a change in the image files.  16 (standard on AIDA) is a standard for a reason.  Even if you reduced it to 50, do you think you would notice the bar graph or sensor line 1 click off?  Not a chance.  My strong recommendation is to not waste your time or energy in going above 16.

To answer your real question without all the hyperbole, take 100 and divide by the sensor images you want.  You will have to have multiple sensors right on top of each other matched exactly on the x and y axis.  You will need 8 sensors in your case. The first sensor would have images and states for 1-15, the second would be 16-32, the third would be....

Set the first image in the first sensor to be 0 for the low and 0 for the high setting. The second image would be 2-2 until you hit 15.  On the the next overlayed sensor 16-16, 17-17 until you hit 31. On to the third and repeat until you hit 100.  

Its going to be tough not to mess up integrating all 100 images and states without messing it up.  I struggle with 16.

 

Good luck with your endeavor.

Also the 100 state gauges that people make are for temperature and utilization percentage where the value is between 1-100 so a 100 state gauge matches perfectly with the value.

They can be quite beautiful as seen in this example

edit: example removed by the creator's request. 

[Surjeet]

3 hours ago, rinaldop said:

I have no idea where you got your numbers from but they make no sense. Here is a simple table with the way to set up the 8 sensors needed.

 

Thank you Brother @rinaldop!

Even I support this and use 100 states for all the panels I craft 😍

[ferocco]

On 07/06/2024 at 10:34, Hundredd said:

E 1920x1080?

yes!!! 

 

[TheNext]

18 hours ago, catkinson633 said:

I got very carried away!

 

 

I really liked this. Which software have you used for the background image?

Any tutorials to build such good looking background (outline) boxes?

[Arbit]

20 hours ago, rinaldop said:

I have no idea where you got your numbers from but they make no sense. Here is a simple table with the way to set up the 8 sensors needed.

 

Yes. Having a blank at zero or copying the 1 pic is a great solution to make the numbers easier to deal with.  If anyone wants to use a 100 image sensor, go for it.  While I can see how it will look better, the amount of work and images involved is (for me) not worth the extra effort.  I guess if you stare at your sensor panel continuously, it will make a difference.  I think most of us just glance at our panels and look at where the line is pointing to get an estimate of whatever the status is.  Again, for me, it's not worth the effort.  I put a lot of thought into making a moving picture using sensors similar to how others use rainmeter.  We would need a sensor that changes values continuously, like the clock.  In order to do it, we would need 1000s of sensors, one for each second of the day.  (86,400 seconds) Still looking for an elegant solution.  I'm waiting for the day when AIDA 64 will allow moving gifs to be included in our panels.

[Arbit]

20 hours ago, rinaldop said:

Also the 100 state gauges that people make are for temperature and utilization percentage where the value is between 1-100 so a 100 state gauge matches perfectly with the value.

They can be quite beautiful as seen in this example

Great looking panel, by the way.

[rinaldop]

4 hours ago, Arbit said:

Yes. Having a blank at zero or copying the 1 pic is a great solution to make the numbers easier to deal with.  If anyone wants to use a 100 image sensor, go for it.  While I can see how it will look better, the amount of work and images involved is (for me) not worth the extra effort.  I guess if you stare at your sensor panel continuously, it will make a difference.  I think most of us just glance at our panels and look at where the line is pointing to get an estimate of whatever the status is.  Again, for me, it's not worth the effort.  I put a lot of thought into making a moving picture using sensors similar to how others use rainmeter.  We would need a sensor that changes values continuously, like the clock.  In order to do it, we would need 1000s of sensors, one for each second of the day.  (86,400 seconds) Still looking for an elegant solution.  I'm waiting for the day when AIDA 64 will allow moving gifs to be included in our panels.

You probably know this but I will mention it just in case anyone is interested. You can use moving gifs in AIDA64 right now if you use the LCD format. Just use a browser or display program to display them.

The developers have made it clear that they are not going to allow anything more regarding gifs. 

[TheNext]

1 hour ago, catkinson633 said:

I used adobe illustrator, it includes a 3d extrusion capability.

I will try and do a video and post on you tube on how to make the sensor panel basics
 

Thank you. I would be more interested in knowing or learning how to make those boxes, boxes outline and deep looking shapes where sensors are running underneath

[rinaldop]

2 hours ago, catkinson633 said:

Thats a VERY long vertical panel, is that the correct measure? 

I could relatively easily change this panel, but the length is an issue when editing in aida as i can't see the bottom of the pannel (I can't scroll to see it) if anyone has a solution for that, I could figure the pannel out. It would be a larger version of this pannel 

 

This must be the panel that he is using

https://www.amazon.com/VSDISPLAY-2560x720-VS145T-001T-Display-VS-AP2K/dp/B0BZYVM4YL

He just turned it sideways.

For long panels I create the bottom gauges at the top first and shift click all the entries in the sensopanel manager and use the arrows to move them all to the bottom. I click and drag the panel up and hold it there to see how they look then make adjustments.

You could try to make a virtual desktop with a higher resolution but I have not had success with that.